G15 Driver for G15 Cube Servo
₹470.00
-
Maximum Continuous Current: 8A
-
2 x G15 Cube Servo ports (can be daisy chained to more servos)
-
External power terminal for Cube Servo.
-
2 LEDs as logic power and servo power indicators.
-
3.3V and 5V signals compatible.
- Description
- Specification
- Reviews (0)
Description
This is G15 Driver for G15 Cube Servo. G15 Driver (GD02) is used to drive G15 Cube Servo. It is a Full to Half Duplex Communication Converter board. It converts UART full-duplex communication to half-duplex single line communication which is required by G15 Cube Servo.
GD02 has two ports for the Cube Servo. G15 Cube servo is a serially controlled servo motor which can be daisy-chained. G02 has a separated port connector for motor’s power supply. GD02 offers a simple and easy way to use to control G15 Cube Servo with UART communication from any microcontroller board for example.
Improvements in Rev2.0
-
Polarity protection for power input to Cube Servo.
-
Additional DC jack socket for Vin, using DC adapter will be easier.
-
Compatible UART signal port with UC00A. Control from the computer will be easier.
-
Optional slide switch to select the logic for UART flow control, making it compatible with Arduino G15 shield library.
Features :
-
2 x G15 Cube Servo ports (can be daisy chained to more servos)
-
External power terminal for Cube Servo.
-
2 LEDs as logic power and servo power indicators.
-
3.3V and 5V signals compatible.
Package Includes :
1 x G15 Driver
1 x 1*6 Burg Pin(Straight)
Useful Links
GD02 Software Serial Arduino Library
GD02 Arduino Library V1.0
SK40C GD02 Sample Code V1.0
| UART Voltage(V) | 3.3 to 5 |
| Motor Voltage(V) | 7 to 15 |
| Maximum Continuous Current(A) | 8 |
| Length (mm) | 38 |
| Width (mm) | 43 |
| Height (mm) | 13 |
| Weight (gm) | 12 |
| Shipment Weight | 0.016 kg |
| Shipment Dimensions | 5 × 5 × 2 cm |
Reviews
There are no reviews yet.